How to restore factory Windows on a laptop. How to restore factory "Android" settings. What to do before you reset your laptop to factory settings

How to return a laptop to factory settings and why is it necessary? Such actions may be required in several situations, for example, if any failures occur that interfere with the operation of the operating system, as well as if Windows is “cluttered” with unnecessary programs, old drivers and various components. Such reasons can lead to the computer running much slower, and sometimes resetting the BIOS solves the problem of Windows blocking.

When it is impossible to restore

How to return a laptop to factory settings if the operating system has been reinstalled? Unfortunately, in this case this cannot always be done. After purchasing a device, many people reinstall the operating system that comes with it, at the same time deleting the files needed for recovery from the hard drive. If the hidden partition from the recovery is deleted, then you will not be able to reset the laptop to factory settings.

However, in such a situation there is a way out: for example, everything you need can be on the disks supplied with the device. You can search for images of recovery partitions on the Internet, in particular on torrents. In addition, a recovery disk is available for sale on the official websites of manufacturers.

Result

Before you restore your laptop to factory settings, you need to know what this will lead to. Firstly, all user files are deleted, although in some cases only the system drive is cleared, it is still necessary to back up all important data. Secondly, the system partition is formatted, and the operating system is automatically reinstalled (programs and user drivers are removed), without the need to enter a key.

Drivers and programs preinstalled by the device manufacturer are automatically installed after the first start of the operating system. If the entire process is completed, the user will receive a laptop in its original software state, the same as it was purchased in the store. It can't solve just some problems. For example, if the device turned off due to overheating, then most likely, after restoring the BIOS to its factory state, this will continue.

Acer

Each manufacturer has its own BIOS recovery scheme. How to return an Acer laptop to factory settings? In fact, everything is much simpler than on computers from other companies; everything will take just a few minutes. First you need to turn off the computer, then turn it on while holding the Alt key. At the same time, you should press F10 at a frequency of two clicks per second, after which the system will ask the user for a password. If this device has never been restored to factory settings in the past, the password is standard: six zeros (000000). Next, a menu will appear in which there will be an option to reset the settings to factory settings (in the English version, Factory reset).

However, there is another way to return a laptop to factory settings. Windows (7, Vista or higher) that comes with Acer devices has a special utility called eRecovery Management. It should be looked for in the programs preinstalled by the manufacturer. After startup, you need to use the "Recovery" tab.

Lenovo

Here is another company that supplies along with the operating system a bunch of unnecessary programs that slow down and clutter up the operating system, but among them there is a utility similar to the one described above from Acer, it is called OneKey Rescue System. But if you can’t log in, how can you return your laptop to factory settings? Lenovo has equipped its devices with special buttons for entering the BIOS environment; by the way, this is a feature of all laptops from this company: the BIOS loads only after pressing the button, no keyboard shortcuts.

The so-called Novo Button is a rather distinctive small round button with a circular arrow icon facing left. It is usually located next to the power button, but can be at the power input, and in the Yoga family of laptops it is located on the left side, between the headphone jack and the volume control.

Instructions

So, when the button is found, you must first turn off the laptop, and then press the Novo Button instead of the power button. A menu will appear on the screen containing the System Recovery item.

This program will be useful if the user is interested in how to return a laptop to factory settings. Windows 7 and higher will also be able to create backup copies through the Lenovo utility. If there is one, you can roll back the system to it by selecting the appropriate item in the next menu. If there is no restore point, then click “Restore from original backup”.

The program has a very convenient interface, intuitive even for a novice user. After the restoration is complete, you will need to re-enter all user data as after the purchase.

Then, having installed all the necessary drivers and programs, you can make a restore point and restore the system to it next time.

Dell

Almost all modern devices, be it tablets, phones or laptops, are equipped with a hidden reset interface, and this manufacturer is no exception. How to reset a Dell laptop to factory settings?

They don’t have a “magic button” like Lenovo, but everything is not so difficult, even a beginner can handle it. First, you should turn off the computer, and after turning it on, when the Dell logo appears on the screen, you need to hold down the F8 key if the operating system is Windows 7 and older, or the Ctrl + F11 combination if it is XP. A window with advanced OS boot options should appear. Next, use the keys to select the interface language, and then click “Next”.

The utility will prompt you to enter a login and password - the same data that the user uses to log in to the system. Next, you need to select the option to restore the factory image (Dell DataSafe Restore and Emergency Backup) and “Next” again. The next window offers the option “Repair your computer”, which you should click, and then “Next” again.

If there is a restore point, you can try to boot from it, but if not, in the new menu the utility will offer only one copy of the operating system - the factory one. You need to select the recovery option without saving files and click “Next”.

The last request from the program will be to confirm the action; you must also use the keyboard to select “Yes, continue.” This will initiate the factory reset procedure. The process usually takes up to twenty minutes. When finished, the laptop will automatically reboot and the user will be prompted to configure the operating system.

Toshiba

How to return a Toshiba laptop to factory settings? The rollback instructions can also be considered one of the simplest. First you need to turn off the laptop, then press and hold the “0” button on the keyboard. It should be noted here that the key from the number pad located on the right side of the keyboard will not work.

Turn on the computer while holding down the "zero" key. When you hear a characteristic beeping sound, you can release the button: the launch of the recovery utility has been initiated, you can simply follow its instructions.

HP

To restore factory settings on HP computers, you must first turn off the laptop and also remove all memory cards, removable hard drives and other devices. Then turn on the computer and press the F11 key on the keyboard until the recovery environment loads on the screen - a system utility from HP called Recovery Manager (it can also be launched directly from the operating system by clicking on the shortcut in the list of programs).
After downloading the utility, you must select System Recovery, after which the user will be prompted to save any data. If the reason for resetting the settings was that your computer was infected with viruses, then it would be better not to save any data in order to prevent the problem from recurring in the future.
The recovery process starts automatically and does not require user intervention. In this case, the computer may reboot several times.

After the process is completed, the laptop will return to its factory state; branded HP drivers and programs will be installed on it, which you can leave or delete.

About computer repair

Quite often, people call computer technicians to reinstall the operating system. As a result of this, the recovery partition will be deleted from the computer, and the next time the user will again have to call the service and pay money for what he could have done with the help of a recovery utility. The program itself will install the operating system, which will also be licensed, with all factory drivers and programs.

Therefore, before contacting the service, you should try to use the built-in recovery partition; this sometimes saves not only money, but also time. Everyone needs to know how to restore factory settings on a laptop, because after mastering simple instructions, the owner of the device will be able to return it to a clean state at any time.

Hello admin, I want to restore the factory settings on my HP laptop, I launched the HP Recovery Manager program and it offers 8 recovery options! How do I choose the right one? There are two partitions on my hard drive: (C:) and (D:).

Us:) Windows 8.1 installed.

On (D:) There is a collection of films and music.

Tell me, when restoring from a laptop, will all files be deleted or only information from the disk (C:)?There is no way I can lose the files that are on the drive (D:), and there is simply nowhere to copy them; I don’t have a portable USB hard drive. If you have a detailed article for me, I would be grateful.

How to reset an HP laptop to factory settings

Friends, if the operating system installed on your laptop has become hooligan, then you don’t have to bother searching for various viruses, crooked programs, incorrect drivers and other reasons that led to unstable Windows operation; just restore the factory settings on your laptop! You can do this on an HP (Hewlett-Packard) computer in 20 minutes. The operating system will be in perfect condition at the time of purchase, all that remains is to install the software and that’s it. A rollback to the original state will only affect the drive (C:), information on other drives will remain untouched.

The program is responsible for recovery on HP laptops HP Recovery Manager, which can be launched even if the computer device does not boot. In my article I want to show you all the ways to restore an HP laptop to “store settings”.

First way. Go to the Metro Windows 8.1 interface, find among the applications " HP Recovery Manager" and launch it.

Click on the button “Windows Recovery Environment. Restart your computer and enter the Windows Recovery Environment to update the image or restore the system to the original factory settings.”

Click OK. Laptop reboots

Click Diagnostics.

Recovery Manager

Click on the button Restoring the system to its original condition when shipped from the manufacturer.

Mark the item Recover without backing up files. Further.

The process of returning the laptop to its original settings begins.

Click Finish.

All we have to do is configure our personal settings and get started.

Regional settings are usually configured correctly. Further

I accept

Skip

Skip this step

Use standard settings

Enter your username and click Finish.

Loading clean Windows 8.1. The recovery affected only the drive (C:), all files on other drives remained intact.

How to restore to factory settings HP laptop if it won't boot

This can happen due to various system errors or destructive actions of malware, in which case you will not be able to get to the Metro interface and launch HP Recovery Manager, but you can still start the rollback process.

Press the button when booting the laptop Esc and enter the settings menu. To enter recovery mode, press the key F11.

The already familiar “Select Action” menu.

Select the Diagnostics option.

Recovery Manager

Click on Restore the system to its original condition as shipped from the manufacturer. Then you already know how to act.

How to restore to factory settingsHP laptop if it won't boot and hidden partitions with factory settings are deleted

If you reinstalled Windows 8.1 on Windows 7 on your laptop, then you probably deleted everything before installing the seven partitions on the hard drive, including a hidden partition with the factory image. In this case, you need to use . These discs need to be made in advance.

Insert the recovery disk into the laptop drive.

Press the button when booting the laptop Esc and enter the settings menu. To boot the laptop from the recovery disk, press the key F9.

Select the drive in the boot menu and press Enter.

Resetting your laptop to factory settingsAsus

If you reinstalled Windows and installed a newer version (for example, changed Windows 7 to 8 or 10). When you reinstall Windows, the files necessary to restore your settings are deleted unless you deliberately saved them. Even if Windows was reinstalled by a professional, he most likely also deleted the file we needed.

If you find yourself in such a situation, then you have no choice but to find or buy a disk to restore the starting settings. Or download it on the Internet.

Before you begin the operation to restore settings, decide for yourself whether you can handle it. ASUS laptop repair service center can help you with this task.

Step-by-step instruction

• Place all the files you need on a flash drive or disk, especially from the disk on which the operating system is installed. Files stored on other drives should not be affected, but for security reasons we recommend saving the most necessary ones on removable media.
• We turn on the laptop, and as soon as the download starts, press the “Delete” or “F2” key (in newer models “F10”).
• A BIOS settings window will appear in front of you, in which you need to select a tab called “Boot”. In the new window, select “Boot Booster”, press the “Enter” key and set the value to “Disabled”.

• Next, save the changes made by selecting the last tab and clicking “Save changes and exit”, or simply pressing “F10”. The laptop will automatically restart, then turn it off.

• After a short time, turn on the laptop and repeat Step 2, only this time press the “F9” key.
• A window will appear on the monitor in which we select Windows (version) and click “OK”. The factory reset process has begun.

Wait for the process to complete, during which the laptop may reboot itself several times.

There are several ways to reset Acer to factory settings, both in Windows itself and using Bios. During this process, make sure your laptop is plugged into a wall outlet and disconnected from other drives. Review of the new ZenFone AR smartphone.

Step 1. In the search box, type "acer recovery" and click "Acer Recovery Management" to open Acer Recovery Management. Or simply select Start > All Apps > Acer > Acer Recovery Management to access Acer Recovery Management.

Step 2. In the main window, click "Restore" on the left, and then select "Full factory reset."

Step 3. Then follow the instructions and click “Yes”, “OK”, etc. to start the recovery of your Acer laptop.

During and after the process, the laptop reboots several times. Finally, it will restart and ask you to set up your laptop the same way as the first time you received it.

How to reset Acer settings from Bios?

Step 1. Turn on the laptop and press "ALT + F10" when its logo appears until it reacts to your work.

Step 2. It will then boot to a blue screen that says, “Select an option.” Select "Troubleshoot" to continue.

Step 3. On the next screen, click Reset this PC.

Step 4. Select the files to delete and continue with Acer hard reset.

The laptop will also reboot several times throughout the process and finally settings are needed.

How to factory reset Acer on Windows 7?

Because the Acer eRecovery Management interface is different in different operating systems, Windows 7, Windows 8 or Windows 10. There will be no pictures in the steps. Additionally, the following steps are also general guidelines and can be used on multiple OS systems. The best budget smartphones of summer 2017 under 15,000 rubles.

By resetting your Acer to factory settings, you will erase all data and personal settings on your device. Thus, please move your important data or backup it before rebooting your Acer. The new Gionee F109 has been released.

Reset Acer settings using Recovery Management utility

Acer Recovery Management – ​​Acer ARM factory reset utility has options for resetting your computer with or without deleting personal data.

Click the mouse in the lower right corner of the screen or press Windows-C to bring up the menu, and then click Search. (for windows 8) If you have windows 7, click start and start searching in the “Find programs and files” window or go to the title. Nokia 2 2017 release date has been revealed.

Click " Windows-Q", enter " Recovery", and then select " Acer Recovery Management" from search results. For Windows 7, in the search write “Acer Recovery Management ». If you are prompted to allow the program, select " Yes».

Reset Acer settings without deleting personal data

The Refresh option restores Windows without deleting your personal files or custom Windows settings. Do the same as in the video even though it is in English.

Installed apps and programs outside of the Windows Store are not saved.

1. Select " Individual recovery» (“Save user data”) and press " Further" .
2. Select " Update" and press " Reset».

How to reset Acer to factory settings?

The Restore option completely resets your computer to its factory default settings and deletes all personal data.

This option removes all applications and programs, including those from the Windows Store.

1. Select " Restore factory settings" and press " Further" .
2. Select Just delete my files, this will only delete your personal files. Or choose completely clean the disk, to completely remove and reinstall all Windows files.
3. Click " Reset".

Reset Acer settings create a backup copy

ARM can also be used to create a USB storage device. Before you get started, you'll need a 16GB or larger USB flash drive. How to reset LG to factory settings, 3 ways.

An ARM recovery disk is essentially a copy of your computer's recovery partition, saved to a USB flash drive.

Although 16GB is the minimum size, your drive may require more space.

1. Connect the USB drive to your computer.
2. Click " Create a default backup" .
3. Fill in Copy recovery partition from PC to recovery disk and press " Further" .
4. Select the USB drive from the list, click " Further", and then " Create" .

Using a Backup

The recovery drive is used when the computer boots.

1. Turn off your computer and connect your recovery drive.
2. Start your computer and click F2, as soon as the first logo appears on the screen.
» using the arrow keys.
3. Select USB HDD using the arrow keys, and then press F6, to move it to the top of the list.
4. Select the tab " Exit" using the arrow keys, then " Exit saving changes" and press " Enter" .
5. Select your language when your computer restarts.
6. Click " Troubleshooting", then " Reset your computer" And " Further".
7. Click " Windows 8" and select " No", keep existing partitions.
8. Click " Completely clean the disk" and then " Reset". Wait until your computer restarts.
9. Dismount the drive as soon as the recovery screen appears, then tap " Continue" .

Recovery partition

Recovery partition is the partition of your computer's hard drive that contains the reinstallation data. How to hard reset Xiaomi?

Using a section

1. left Alt key And F10, when the logo appears. Acer Revo users with dual mode touchpad/keyboard Alt-Fn-F10 instead of this.
2. Click " Enter" on the Windows boot screen.
3. Select " Restore the operating system to factory settings By default." To delete all personal data or Restore the operating system and save user data, to save it.
4. Click the button Further and then again Further and finally OK .

Recovery CDs and DVDs

1. Restart your computer and click Del, when the logo appears.
2. Insert the CD into the optical drive.
3. Select " Additional BIOS features" using the arrow keys and press " Enter" .
4. Select 1st Boot Device, then use the key +, to set the optical drive as the first boot device. For dual mode touchpad/keyboard use this instead Shift + .
5. Click F10, to save settings to save and exit BIOS or Fn-F10 when using a dual mode touchpad/keyboard.

Reset Acer settings of other models

1. Restart your computer and click F12, when the logo appears.
2. Select " Optical drive" in the "Download" menu.
3. Insert the CD into the optical drive and press Enter .
4. Follow the onscreen instructions to restart your computer.