Instructions for private territory in minecraft. How to private a territory in Minecraft on a server. Protecting the territory from creepers, fire, mobs

In Minecraft, you need to take care first of all about security. Many players, playing Minecraft online, ask the same question: “ How to private territory in Minecraft? In this article you will find detailed instructions about private territory on the Minecraft Gamai.Ru server, how to make a child private (region within a region), and how to use protection against user commands. We'd love to see your comments! If we missed something, we will definitely add it at your request.

So, you have found a wonderful place where you want to keep your house. Having chosen the territory where you want to settle, it is advisable to secure it.

To make an area invulnerable, it must first be allocated. Open the chat (Letter T on your keyboard) and enter the command there

//wand

A wooden ax will appear in your inventory. It is they who need to allocate the territory in the form of a cube diagonally.

Selecting a territory in Minecraft

We take an ax and click on the first cube with the LEFT mouse button (in the figure it is “Point 1” - for the top point you can build, for example, a pillar from the ground), then go to the second cube (in the figure - “Point 2”) and click RIGHT mouse button to set the second point. Our recent innovation will greatly help you - illumination of the allocated area.

After this, the region must be named somehow:

/region claim (region_name)

We call the region whatever you like, but without spaces.

For example:

/region claim gamai

Now your region is completely protected from other players. No one will be able to destroy or build on your territory unless you invite a player to do so.

Protecting the territory from creepers, fire, mobs

To protect your territory from creepers, TNT, mobs, fire and all sorts of other destruction, you need to set flags for your territory.

To set the flag we write the following:

/region flag (region_name) (flag) (constant)

(region_name) is the region you created

(constant) - deny-prohibited, allow-allowed, none-no constant.

For example:

/region flag gamai creeper-explosion deny

This command will prevent creepers from destroying your territory when they explode.

By default, all flags are enabled - allow.

List of flags for protecting territory:

Flags available to players (on some servers, some of the flags are available only to VIP players):

• pvp- attack by other players
  
• sleep
• tnt- ability to explode tnt
• creeper-explosion— the creeper explosion destroys the territory or not
• lighter
• lava-flow- can lava flow?
• potion-splash- damage from potions
• ghast-fireball- fireball damage

• pvp- attack by other players
• enderman-grief- ability to griefer endermans
• lighter- ability to set fire with a lighter
• lightning- lightning can destroy your building
• use— possibility of using mechanisms (doors, plates, etc.)
• water-flow- can water flow?
• lava-flow- can lava flow?
• potion-splash- damage from potions
• sleep- players can/cannot sleep in your zone
• ghast-fireball- fireball damage

If you did everything correctly, your region has become invulnerable.

So, to protect your territory you need to do only three things:

1. Enter the command //wand and select the territory in the form of a cube with the left and right mouse button.
2. Register the selected territory with the command /region claim region_name
3. Specify the required flags with the command /region flag (region_name) (flag) (constant)

How to add/remove another player?

You can add another player (overlord) so that you can build/destroy together with the following command:

/region addmember region_name player_nick

Removing a player:

/region removemember region_name player_nick

To find out who is the co-owner of your territory, you can type the command

/region info region_name

How to remember the name of your region?

Take the rope in your hand and right-click on the welded area.

or enter the command

/rg list

(you can /region list)

How to remove visual highlighting of an area?

Enter the command //sel (yes, with two slashes).

To select your region again, type the command

/rg select region_name

Special teams

What to do if you have a powerful stack of spawners and you don’t want any of the VIP users to change the mob spawner? In this case, you can prohibit one command from changing the spawner

rg flag rg_name blocked-cmds /spawner

or prohibit the execution of any command except one, for example, returning to spawn:

rg flag rg_name allowed-cmds /spawn

Use this flag with caution and be fully aware of what you are doing!

How to delete your region?

Your region is deleted using the command:

/region delete region_name

Thus, you know how to private a territory on the Minecraft Gamai.ru server.

We wish you a pleasant game and incredible buildings!

How to reassign a region (move, shift, resize)?

If you need to make some changes to the region, for example, make it larger, then you don’t have to delete it!

Select a new zone using //wand (or /rg select region_name), make adjustments and run the command:

/region redefine region-name

or

/region move region-name

or

/region update region-name

Now the region has been changed, but all flags are retained from the old region.

How to make a child region (region within a region)?

This function will mainly be useful to mayors, because They have a very huge allocated area for the city.

If you have a main region, for example “reg1”, and you do not want to give your friend full access to the region, then you can simply set aside for him some small area in the “reg1” zone.

To do this you need to be the Owner of “reg1”:

/rg addowner region owner_nick

Now you can start selecting a region for a friend (player) using //wand, and then:

/rg claim region_name_for_friend

After this, make the new region (for example “reg2”) a child of the region “reg1”:

/region setparent child_region primary_region

or

/region parent child_region main_region

or

/region par child_region main_region

Eg:

/region setparent reg2 reg1

Now the region reg2 belongs to the region reg1, and if reg1 is deleted, all the regions attached to it will be deleted.

Each child region can have its own flags, regardless of the flags, but to avoid flag conflicts between the child and main regions, the priority must be specified for the child region:

/region setpriority child_region priority_number

Eg:

/region setpriority reg2 20

The default primary region priority is 0.

Having mined and accumulated a lot of different materials, and installed everything necessary for life in it, for example, a bed, a TV and other interesting objects, it is only natural that you want to protect them from attacks by other players.

It is very important to ensure not only the safety of your home, but also to prevent chests from being opened and diamonds stolen. Naturally, all this can be hidden, surrounded, and housing can be built in a hard-to-reach place. But the most effective method of protection is the privatization of territories.

What you need to privately own a territory in Minecraft

To secure something, you need an axe. To make it, you need to put three boards in the crafting window in the upper left corner, and two sticks in the middle cell and the cell below it. This way you will be able to craft a wooden axe. But if you replace the boards with cobblestones, gold or diamonds, you can get a stone, gold or diamond tool, respectively.

How to privatize territory in Minecraft

To make it private, you must determine the approximate size of the territory you want to make private. You should go to the starting point of the privatized area and click on the selected block with the left mouse button so that the inscription “First position set” appears on the screen. Next, you need to proceed to the next point and click on the right mouse button. You also need to select the top and bottom points.

Minecraft has special commands that allow you to privatize an area. Thus, /region define(/region redefine) is used to change the private zone. The /region claim request allows you to assign a region to yourself. The inscription /region select selects a region. To view information about , you need to enter /region info.

Not only you, but also your friends in Minecraft can use the acquired items. The /region addowner(/region removeowner) command allows you to change the owners of a region. By adding a friend to this list, you can give him exactly the same rights as you. To view a list of all the territories you have claimed, you can enter /region list.

You can change the dimensions of the welded area in height using the command //expand<кол-во кубов> <направление>. To select the height and depth of the private, you need to enter the appropriate number of blocks, and to determine the direction, the English words down - down, up - up are used. You can delete a private by entering the phrase /region remove<имя зоны>

Thus, having learned how to privatize a territory in Minecraft, you can safely build beautiful houses, hide the acquired wealth in them, and close chests from access to strangers. You can also form teams with friends and ensure shared use of private areas.

However, not everyone knows how to privatize their buildings and chests. As a result of this, any player easily takes away resources and a house from such people. Many people get upset and leave the servers, but in this article we will tell you in detail how to lock a house in minecraft.

Home privacy on servers in Minecraft varies, but there are no significant differences, so let's get started with home privacy in Minecraft.

How to private a house in Minecraft on a server?

1. First, we need to select the territory that we will privatize.
2. After which we run to one of the corners and begin to dig under ourselves - we need to dig to the lowest point of the desired territory. However, you should not make it private before bedrock; as a rule, privacy on servers is limited. In this case, you may not have enough space. Therefore, it is worth stopping at 6-8 blocks of stone.
3. Once we have dug, enter the command /rg pos1 ( pos1 needs to be written together !), after which we return upstairs and run to the opposite point, located at the other end of the private.
4. We climb to the desired height. The height of the private is as high as possible - as much as the size of the private allows.
5. After reaching the required height, write /rg pos2 (pos2 must be written together!).
6. Next, we need to register /rg claim region_name. The name must be indicated in English letters.
7. If the private has not been created, instead of /rg claim you should write /rg create region_name
8. In this simple and uncomplicated way, we were able to privatize the territory. Stoves and chests will be privateized at the same time as the region, there is no need to enter additional commands. But still It’s better to ask the server administration, on which you play!

How to deprivate a house in Minecraft?

Unprivileging a region is much simpler - it varies on some servers, but the principle is simple.

• Enter /rg delete region_name or /rg remove region_name.
• After that, all buildings are unprivileged and everyone can break them. However, be careful.
• If you deprivate, any other player can deprivate!

That's all, in this article we looked at how to privatize and deprivate a house on a Minecraft PE server!

Attention! To our website:

Let's approach this question from this angle: what does it mean to private, why is it needed and where is it used?

Private territory is the process of selecting a certain part of the terrain in Minecraft and describing it with certain commands that do not allow anyone other than its owner or user to change the composition of this territory. This is necessary so that the insidious Griefers cannot rob your house in Minecraft.

The next question is: who are Griefers? As it was said in one TV series about the Zombie Apocalypse, there is nothing more dangerous for a person than another person. After all, Griefers are Minecraft players who are too lazy to get resources and other things in Minecraft themselves, and who rob other players for profit. True, there are also Griefers who, instead of robbing Minecraft players, set traps in their houses just to have a laugh. It is for such bastards that we need to privatize the house.

From what I told you, we can conclude that you need to private only on large servers, because there are no Griefers in a single player game. To be able to privateize a territory on your server, you need to install the special Minecraft Bukkit plugin “World Guard”.

To secure a house, you need to select a region. Any part of a selected region in Minecraft is a cuboid. This means that only a parallelepiped-shaped area can be identified (no other shapes). It is highlighted by two dots.

The first and simplest way to select a region

Select one block with the left button while holding a wooden ax in your hand (it can be obtained an infinite number of times using the //wand command), and the other with the right button, also holding an ax. These will be the extreme points of our cuboid. But this method is not the most convenient. With it you will have to erect high pillars and dig deep holes so that you can select the extreme point.

Attention: the brackets below< >There is no need to write in commands. This applies to this entire text.

To make your work easier, we issue the commands:
//expand<длина> <направление>– In this way we will expand the region in the direction we set.
For example: //expand 7 up – The allocation of the territory increases by 7 cubes from bottom to top.

//contract<длина> <направление>– This way we will reduce the selection of the region in the direction we set.
For example: //contract 9 down – The allocation of the territory is reduced by 9 cubes from top to bottom.

We can choose the following directions:

1. down;

The first one changes the parameter in the direction we are looking. The second two do it down or up.

Let's talk about the contract command additionally

By choosing the me direction, we will reduce the region by the number FROM us that we specified. By specifying the up side, we will make the region smaller from bottom to top - which means its bottom edge will rise up. You can also use a third argument between the first and last, which will make it possible to specify the amount of reduction of the selection from one side to the other.

If we want to move your entire selection from side to side:
//shift<длина> <направление>.
Example://shift 3 down – This will move our selection down 3 blocks.

To select a block from a distance, you will need the following commands:
//hpos1 (instead of left click);
//hpos2 (instead of right click).

Thanks to these commands, the extreme points appear in those blocks that stand behind the cross located in the middle of the screen.

When changing the selection of a region, the chat shows the coordinates of the outermost block and the number of blocks in the selected region at the moment.

Now that our private territory has been selected, we can save it with a name that we ourselves will come up with:
/region claim<имя региона>– Saves the designated cuboid as a region with a name we come up with.

Actually, this is already a private territory, but it can be customized.

Each private has players who own it (owner) and their users (member). Owners can change region parameters, and add other owners and just users. The latter can only build, destroy, use doors, chests, etc. - in general, do only what is possible in unoccupied territory. When we create a region, we immediately acquire the status of its owner.

To register another player as the owner or user of a region, you will need the following commands:
/region addowner<регион> <ник1> <ник2>etc.
Example:/region addowner MyRegion MyFriend Somebody;

/region addmember<регион> <ник1> <ник2>etc.
Example:/region addmember MyRegion MyFriend Somebody.

To remove them, you will need to know the following:
/region removeowner<регион> <ник1> <ник2>etc.
Example:/region removeowner MyRegion MyFriend Somebody;

/region removemember<регион> <ник1> <ник2>etc.
Example:/region removemember MyRegion MyFriend Somebody.

Let's look at all this with an example

Two friends Super_Ninja and Duper_Ninja went to a server in Minecraft and built a house. Super Ninja was tasked with securing it. He entered /region claim Ninja_Dojo. After that, he added his friend Duper_Ninja to the owners of this region: /region addowner Ninja_Dojo Duper_Ninja. After some time they decided to make the house more beautiful. They called two more players Samurai_Jack and Samurai_Petya to help. Duper_Ninja added them to the region so that they could not kick them out of it: /region addmember Ninja_Dojo Samurai_Jack Samurai_Petya. When they finished, the diamonds disappeared from their chest. Super_Ninja became suspicious of those two assistants. And he entered: region removemember Ninja_Dojo Samurai_Jack Samurai_Petya. From that moment on, they were no longer members of the private group. But then Super_Ninja found out that Duper Ninja did it. Then he deleted it too: /region removeowner Ninja_Dojo Duper_Ninja. Now he is the only one who can do something in the Ninja_Dojo region.

IMPORTANT POINT: You cannot allocate a territory that is not yours, allocate more than 50,000 blocks of territory or from the sky to the Bedrock, call a private space after someone else and “take over the world of Minecraft.”

When you play Minecraft on a server, the safety of your buildings, chests and other property is in question. To be sure that the place you have chosen to build a house will not be occupied by anyone, that a griefer will not invade your property, and that no one will steal anything from your chests, you need to privatize the territory.

What is private?

Privat territory is the allocation of a certain piece of land into the ownership of a specific player. On some servers you cannot privateize more than a certain number of blocks, while on others the region size is unlimited. Once you have privatized a territory, only you and those who have been added to the region as residents - your friends or clanmates - will be able to manage and use it. In addition to the above, no one in the secured territory can break, build, open chests and stoves, or even open and close doors. Well, let's figure out how to privatize a territory in Minecraft.

What does it take to privatize a territory?

Firstly, you need a little patience and an ordinary wooden ax. On some servers you don’t even need to craft this wooden ax, because you can get it with the command:

//wand or //kit starter

So, now you need to use spatial thinking. Our future region is a cube; we need to mark with an ax the lower point of the region and the opposite upper point.

Marking is carried out by a regular blow with an ax at the selected point.. After hitting the chat, you are informed about the coordinates of the first point and the second.

Remember that when marking a region, you need to take into account all the basements and towers so that your buildings do not come under attack from griefers.

After the region is marked, write to the chat:

/region claim [region name]- the name is entered without square brackets.

You can name the region anything you want, there are only two requirements: the name must not contain spaces, and a region with the same name must not exist. Now that’s it, you have privatized the territory, you can start managing it and building it.

How to make private flags in Minecraft and what they are

There is such a concept - flags are special marks that establish certain rules for your region.

Flags are set using the command:

/region flag [region_name] [flag] [constant]

Examples of the most useful flags:

• pvp - (the ability to attack other players);
• creeper-explosion - (the ability of creepers to damage your buildings);
• tnt - (the ability to explode dynamite).

You can see a detailed list of flags using the command “/help”

There are three constants:

• allow – allowed;
• deny – prohibited;
• none – not specified (default).