How to set up a new iPhone 7 from scratch. What to do if your iPhone won't turn on? Selection and installation of a SIM card

The design of this gadget is very stylish and has several color options. Very high quality materials and assembly of this device. The body is smooth: aluminum and glass, very pleasant in the hands.

It works stably, without failures or glitches. Excellent bright touch screen, calibrated, long battery life, excellent performance, works very quickly. The Home button has been updated, stereo speakers are protected from moisture. Supports one SIM card - nano Sim.

The camera has 12 million pixels, which allows you to take wonderful pictures, has optical stabilization and autofocus, and records videos perfectly.

Front camera Face Time HD with a resolution of 7 million pixels and a new sensor. It takes pictures in the dark without any problems.

The device of this generation uses a 5.5-inch display, 1080p resolution, weight 188 grams, dimensions 158.2 x 77.9 x 7.3 mm.

How to download the instruction manual for iPhone 7 plus

The instruction manual for iPhone 7 plus is very easy to download, click on the iOS image and open the file on your device.

Or watch online on the official website, the link is also in the table.

This model is also searched as: MNRJ2CH/A.

It is necessary to configure it. Without completing it, the user will not be able to use the phone's capabilities. Many people are mistaken and think that only Apple service center employees know how to properly set up an iPhone. But you can save money on their services. After reading our instructions, everyone can independently activate and configure the device without any special skills.

Selection and installation of a SIM card

Before you set up your iPhone 7, you need to correctly install the SIM card in it. Smartphones use a nano SIM card, which is smaller than a regular SIM card. This is due to the fact that there is little space inside the device and the manufacturing company saves it on different modules. The SIM card slot was no exception.

To install a nano SIM card into an iPhone, you need to press the hole near the tray using the special iPaper included with the gadget. You can also use a regular paper clip. After pressing, the tray will extend slightly and should be pulled out completely. Next, you need to place the card in the tray with the front side facing up, push the tray back and push it completely into the slot. Then you must enter your PIN. If there is no firmware for a specific mobile operator, the phone will automatically detect the operator. If the device cannot detect the network, you need to go to “Settings” and select “Operator”.

First setup steps

Setting up iPhone 7 starts with these simple steps:

• turning on - involves pressing and holding the power button for several seconds until a greeting appears on the screen;
• pressing for 3-5 seconds, and then alternately selecting a language, country or region;
• Internet connection - an active Wi-Fi network or mobile Internet is used.

Next, you will need to select whether to enable or disable location services. Activating them will allow you to track the location of the iPhone 7 (which is especially important if the gadget is lost or stolen), use maps and navigation applications, receive a weather forecast, etc. You can enable or disable geolocation services at any time. You need to go to Settings, select Privacy, and then Location Services.

The Location Services feature can be turned on/off completely or for individual phone applications. Turning it off will help extend battery life.

The next step requires you to set up Touch ID and set a password. Touch ID is a feature that allows you to unlock your phone using your fingerprint. The password protects the gadget from use by unauthorized people and protects personal data. To change it, you need to select the “Password Settings” item.

Then you need to select the configuration method: “New Device”, “Recovery from iCloud” or “Recovery using iTunes”. In the second and third cases, you can restore data and accounts from services that a person used on a previous smartphone. On average, the recovery process takes from 30 to 60 minutes.

The next step involves setting up an account that allows you to sign in to various Apple services. You can log in using your already registered Apple ID (username), create a new account, or skip this step altogether.

If you have an account, you should log in to it by writing a username and password, which you will not need to provide later when logging into Apple services. The account allows you to download applications and music from the App Store, synchronize several gadgets, make video calls between them for free, communicate in chats, etc. To obtain it, you must select “Create an Apple ID for free.” Next, you will need to indicate your date of birth, first name, last name, and click “Next.”

Please note that the account creator must be at least 18 years old, otherwise registration will be denied.

After entering your personal data, you must provide an existing email address or get it for free in iCloud. This will be your Apple ID login. Next, you need to come up with a password, select a security question, write down the answer to it, and also enter a backup e-mail. Next, the system will offer to subscribe to updates and news from Apple or refuse by moving the slider. The final step in setting up Apple ID is to accept the Terms of Use. This step cannot be skipped, so you must click “I Accept.” This completes the creation of your Apple ID.

Final setup steps

After creating an account, those who want to set up a new iPhone 7 have the opportunity to connect to the iCloud cloud storage, which will store backups from devices with the iOS operating system, photos, contacts, and applications.

By going to the “Diagnostics” section, a person must decide whether the mobile device system needs to send a daily report to the manufacturer about the technical and functional condition. Consent to the shipment means that the office of the gadget’s creators will regularly receive information about the operation of the hardware and software components, as well as errors and failures in it.

When setting up your phone, you can choose whether to display data on the screen: “enlarged” or “standard.” The first option is intended for people with vision problems.

All of these steps are optional and you can skip them, but they help you better optimize your custom smartphone and get the most out of its capabilities.

Useful additional settings

Turn on the Siri app

To use the program you must be connected to the Internet. You need to select the following items one by one: Settings⇒General⇒Siri. Next, move the slider to the “ON” position. If necessary, it is possible to select a language for voice commands.

You can then turn on the application by pressing and holding the Home button. An image of a microphone appears on the gadget’s screen, as well as the text “How can I help?” All you have to do is voice a command or ask a question.

You can set Siri to autoplay. To do this, you need to enable the Raise to Speak option. The application will automatically launch when you bring the iPhone to your ear.

Installing the application

You can install any program directly from your phone or by connecting to your computer. In the first case, the Internet must work on the iPhone. You need to go to the App Store online store, select an application and download it. After downloading, you can run the program. The second installation method involves connecting your mobile device to a laptop or personal computer with iTunes installed. After the computer “detects” the phone, you need to select the App Store in iTunes, find the desired application there and download it.

Internet setup

If your cellular operator provides a mobile Internet service, you won’t need to configure anything. You should go to “Settings” and select the required network.

To access Wi-Fi, you need to enable it through the quick menu or “Settings”. If a person is in an area where he has previously connected to a network available in it, the phone will automatically connect to the Internet. Otherwise, you should select the network yourself from the list of available ones. If it has a password, then to connect you must first know it.

It is not necessary to trust the settings of your phone to the sellers of Apple equipment stores. The tips listed in the article allow you to understand how to set up your iPhone yourself. Using them, you can install a nano SIM card, set the language and country, connect to the Internet, select a configuration method, create an Apple ID, etc.

Have you just come from the store, taken out a new product from Apple with your hands trembling with happiness, but don’t know what to do with it now? No problem, read these detailed instructions on how to set up an iPhone from scratch like a new phone! Go!

iPhone activation and setup

When you turn it on for the first time, you need to do several steps once to initially set up your iPhone, which you will never have to repeat later. So, after pressing the power button, the first thing the phone will do is greet us in several languages ​​and offer to set up the iPhone. Click on the corresponding link

In the next step, select your country

Next, to set up the iPhone, we will be asked to connect to a WiFi network. If you wish, you can do it right here. If there is no free Wi-Fi in the coverage area, then skip this configuration and select “Use cellular communication.”

After this comes geolocation - determining the location of the smartphone using GPS satellites. Since it consumes battery power unrealistically when constantly activated, it is better to disable it at this stage of setting up the iPhone. Subsequently, when installing applications, for example, Navigator, the phone itself will ask again whether you need to allow the use of geolocation specifically for this application - then we will allow it.

All modern iPhone models contain the unlocking function using a fingerprint - you will be offered to set up the so-called Touch ID in the next step. Follow the instructions on the screen, place your finger on the scanner and this smartphone protection will be activated. Later you can add more fingerprints for other fingers or family members.

And upon completion, we will also be asked to come up with a six-digit password in case the fingerprint scanner does not work

The next step is to restore settings from your old phone. If you already had an iPhone before, you can transfer all the old saved iPhone settings to the new one. If this is your first Apple phone or you don’t have a backup copy of your old one, then select “Set up as a new iPhone.” There is also the opportunity to transfer data from the Android platform, but this is a topic for a separate article.

When creating an Apple ID, we will be required to enter the region again

Accept the privacy policy

Enter your real email, which will receive a letter with a registration confirmation code, and also create a password

That's it - now go to the mailbox specified during registration and confirm registration.

Let's return to setting up the iPhone. After creating and authorizing your Apple ID, the activation window for the voice assistant – Siri – will appear. The thing is convenient, but you need to get used to using it. Therefore, if you do not plan to control the phone with your voice, then turn it off - also to save charge.

Finally, if you have the latest iPhone model in your hands, you can customize the appearance of icons and text on the display in a standard or larger version.

All! The iPhone is configured from scratch and is completely ready to work. Now you can start the fun part - installing applications, but more on that some other time.

The iPhone is not an eternal device, although it fails somewhat less frequently than Android, but still this is not uncommon, then the question becomes what to do if iPhone won't turn on. Gadgets often break down, freeze and stop responding to user actions. Often the reason is mechanical or external damage to the device, but this is not always the case.

You shouldn’t think for a long time about why the iPhone 5 or any other model won’t turn on if it was externally exposed to unwanted influences:

1. Perhaps the smartphone was dropped into water; even a short-term immersion or rain can cause a short circuit and failure to work. If the phone was really drowned, you should not turn it on immediately; on the contrary, turn it off and set it aside to dry. After 1 day, try to turn it on, as the probability of restoring its operation is higher, otherwise a short circuit will occur upon startup and the smartphone will be unusable;
2. Mechanical damage. When an iPhone falls from a height, it often takes a hit to the display, but the insides are less likely to suffer. There is no choice but to send your smartphone for repair;

1. Freezing. Batteries are susceptible to prolonged exposure to cold, and they suddenly lose all their charge due to a chemical reaction. You need to warm it up in your hands and then try to start it, most likely you will have to charge it.

In these cases, the malfunction can only be repaired at service centers. There are a number of other reasons that lead to freezing, some of which are quite easy to eliminate.

iPhone turned off and won’t turn on - forced start

If the iPhone 5s has turned off and does not turn on, you should use a function that forces the smartphone to start. The method is relevant for those cases when the smartphone freezes at some stage, perhaps only a black screen is shown, but the backlight works, or after turning off, the phone stops turning on. However, the procedure does not clear device data, so it should be used initially. For each version of iPhone there is the same key combination, only in the latest 7th model it is different:

1. Hold down the Home button and the Power button at the same time. The hold duration should be more than 10 seconds, usually up to 20 seconds. Then the Apple logo in the shape of an apple appears on the screen. This option works for all versions except iPhone 7;

1. A separate, more familiar approach is used in the new version; you need to hold down Power and the volume control, namely the volume down button. Similarly, you need to hold until the actions on the screen begin.

The problem can be fixed with this method, but there are several additional methods.

iPhone 4, 5, 6 or 7 won't turn on - power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure. The user, even when connected, may not see any reaction from the smartphone, but often they are not even aware of such a banal solution to the problem as charging.

The owner of an iPhone needs to connect it to a charger, no matter what the power source is: a 220 V network, a car or a computer. Do not be alarmed if there is no immediate reaction. During deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, this is usually enough time. It is better to charge it for 1 hour and then try to turn it on, do not forget about the previous method, it is still applicable now. Sometimes the process never starts; this can be caused by various mechanical problems.

What can affect charging:

1. Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
2. Make sure that there are no kinks in the wire; there are probably interruptions there;
3. Check the tightness of the contacts; perhaps the wire does not go in completely, then you will have to determine the reason for this;
4. We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation and may have insufficient charging power or practically no power;
5. Sometimes the power or charging controller fails, then you will have to use the services of a service center.

It happens that the iPhone charges, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can use recovery mode. To use it you need to have a computer at hand. It is highly desirable that the iPhone is already connected to it first, and the PC is added to the trusted connection source, but this may not be useful.

The recovery principle is as follows:

1. Connect your smartphone and computer;
2. Launch iTunes;
3. Force a restart of the device - Home (for version 7, volume down button) and Power;
4. A message will appear on the computer screen allowing you to restore the iOS system, just click on “Update”.

In this case, an attempt will be made to install the operating system without erasing the files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click “Restore”.

Ultimately, if the iPhone 6, iPhone 7 or any other version still does not turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem; if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used carefully and charged with original chargers, then most likely it will be possible to restore its operation using the described methods. Otherwise, you will have to give the device to experts.

This review will step by step describe how to set up the iPhone 7 when you turn it on for the first time. At first glance, this is a rather complicated operation. But if you follow the instructions outlined below in full, then coping with it will not be difficult.

Setting methods. Execution order

This operation, how to set up an iPhone 7 when you turn it on for the first time, can be performed in two ways:

1. With the help of a service department for an additional fee.
2. On one's own.

In the first case, the new owner of a mobile device gives it to service engineers for configuration, having pre-paid for their services. He also expresses to them his wishes and recommendations, and the specialists strive to implement them as much as possible. In the second case, the device is reconfigured without the assistance of the user.

The general procedure for performing this operation consists of the following steps:

1. Installing a SIM card.
2. Turn on the device.
3. Setting the initial parameters.
4. Creating an account.
5. Setting up a network connection.
6. Installation of additional application software from the Apple Store.

SIM card. Inclusion

At the first stage, you need to install a SIM card from your mobile operator. Moreover, its format must be nanoSIM. If it is large, then it needs to be replaced or even purchased a new starter pack.

Next, using a paper clip, remove the special tray for installing the card. Then it needs to be installed into it. In this case, pay attention to the “key” - the cut corner of the SIM card. It should be in the same place where a similar element is located in the tray. Also, the contact pads of the SIM card should be turned up. At the next stage, we install the tray back into the smartphone.

After this, you can start and turn on the iPhone 7. To do this, just hold down the power button of the device for 2-3 seconds.

Initial parameters. Account

After loading the smartphone, you must enter the PIN code of the SIM card. The next step is to set the current values ​​for the date, time zone, time and country where the device is located. Moreover, it is necessary to provide current data. If this condition is not met, some functions may not be available.

Then you need to connect the device to the Internet. Moreover, this operation can be carried out using cellular communications or using a Wi-Fi transmitter. In the first case, it is enough to activate data transfer. And in the second, you need to scan the frequency spectrum and select the one you need from the list of available connections that appears. After this, you will be required to enter your wireless network password.

Next, you need to create a new Apple ID account or use an existing one. In the second case, the username and password are indicated, and we synchronize the smartphone with the previously specified information. If you create a new account, you must fill out all available fields. They must include your name, date of birth and other relevant information. Again, without creating an Apple ID account, you cannot use the Apple Store. Actually, this is where this stage of how to properly configure the seventh iPhone ends. All that remains is to install application programs for your own needs. This operation will be discussed in the next section.

Installing programs

As noted earlier, installation of application software is the final step in how to set up iPhone 7 when you turn it on for the first time. When performing this, you need to go to the Apple software store. Then the necessary software is searched for and its further installation is carried out. At this stage, the user himself must decide on what he wants from a smartphone. Upon completion of the operation, we exit the software store.

Actually, this is where the first activation ends, or how to activate the iPhone 7 immediately after purchase. Now you need to use your smartphone and enjoy it.

Conclusion

As part of this review, the algorithm for performing such an operation as setting up an iPhone 7 when turned on for the first time was described. Most owners of such mobile devices have a persistent stereotype that this is a complex operation and can only be performed by highly specialized specialists. But actually it is not. Apple developers initially minimized the possibility of errors during the setup process. Therefore, even if something goes wrong and the owner makes a mistake, a hint will appear and allow him to resolve any issue that arises.

Therefore, it is not advisable to pay an additional amount for initialization and software configuration of such a device. It can be done without outside help. At the same time, you will understand the operating features of your smartphone and if problems arise during its further operation, solve them yourself, rather than contact a service center. In the latter case, you will again have to pay a large sum for solving a fairly simple issue.