How to enter the Yota modem settings by IP address: procedure and possible problems? Where to go and how to find.10.0.0.1 yota settings: LTE modems Status Entering the yota modem settings

The Yota router with wi-fi and 4G is very popular among mobile routers. This is one of the leading trends in recent years and therefore there is a need to familiarize Yota device owners with more advanced settings.

Let's take a closer look at this mobile router.

Getting to know the router

The Eta router is a very compact and convenient device that has a battery charge reserve of 16 hours of continuous Wi-Fi operation or 60 hours of standby time. To fully charge a completely discharged battery you will need about 2 hours.

Router management interface, status.yota ru

Lately, many questions have arisen about the inaccessibility of the base addresses of the management pages of Iota routers. In order to log in correctly, you need to know the list of possibly changed pages of the management interface.

Enabling Wi-Fi with minimal settings

To do this, you just need to move the switch to the far left position - Unencrypted network and after half a minute carry out tests of the Yota 4G network. But this is provided that the Yota router is charged and an activated SIM card is inserted.

If this is all in place then you should see the -YOTA network.

But since very few users try to turn on an unprotected Wi-Fi network, then further:

Router input

To do this, you type in the address bar of your browser - http://10.0.0.1 or status.yota ru.

Preset: login-admin, password-admin (can be changed by intermediary sellers)

Setting up a Wi-Fi router

Network name (optional)

Wi-Fi password (preferably not 12345678)

At this point, the initial setup of the Yota Many router is ready.

Introducing 10.0.0.1/status

In order:

1. Device name - Yota Many
2. Battery condition -??%
3. Connection duration - hour, min, sec
4. Maximum connection speed
5. Current connection speed
6. Received\Sent
7. Signal Strength(RSRP)
8. IP address
9. Cell ID
10. Firmware version
11. Open Wi-Fi network - Yota Share disabled/enabled

Advanced Wi-Fi router setup

Here you can (in addition to the main functions - Network name, Security type, Password) manage - Automatically turn off Wi-Fi.

And just below there is a slider that regulates the number of Wi-Fi connected (maximum 8)

There is control for Logo Lighting, Start Page Display, VPN (protocols) and Reset to Factory Settings.

Setting up a Wi-Fi router for advanced users

At the bottom you will be prompted to install the Yota Application and at the top with the -Ports button - you can manage DMZ and port forwarding

Restoring Wi-Fi on the router

Sometimes there are cases when a wireless network categorically refuses to work and standard methods do not help. But we will describe them all in order:

1. Click the Reset button
2. Execute - Factory Reset
3. If this does not help, first do - Reset to factory settings - then - Press and hold the Reset button for 15 seconds.

Obtaining root access to the router

(Attention, be careful, further actions can only be performed by professionals)

Open the management interface http://status.yota.ru/ and execute the commands one by one in the JavaScript console (F12, Console tab in Chrome):

cmsSystem("iptables -F", null);
cmsSystem("iptables -X", null);
cmsSystem("iptables -t nat -F", null);
cmsSystem("iptables -t nat -X", null);
cmsSystem("iptables -t mangle -F", null);
cmsSystem("iptables -t mangle -X", null);
cmsSystem("iptables -P INPUT ACCEPT", null);
cmsSystem("iptables -P FORWARD ACCEPT", null);
cmsSystem("iptables -P OUTPUT ACCEPT", null);

If for some reason the commands did not pass, then we try to disable the protection -

deviceSimpleCommand("iptables -F", null);
deviceSimpleCommand("iptables -X", null);
deviceSimpleCommand("iptables -t nat -F", null);
deviceSimpleCommand("iptables -t nat -X", null);
deviceSimpleCommand("iptables -t mangle -F", null);
deviceSimpleCommand("iptables -t mangle -X", null);
deviceSimpleCommand("iptables -P INPUT ACCEPT", null);
deviceSimpleCommand("iptables -P FORWARD ACCEPT", null);
deviceSimpleCommand("iptables -P OUTPUT ACCEPT", null);

1. rebootDevice(null);
2. cmsSystem("tcpsvd -vE 0.0.0.0 21 ftpd -w /", null); - or- deviceSimpleCommand("tcpsvd -vE 0.0.0.0 21 ftpd -w /", null);

We remove the password entry for the yota router

and look for the line - root:your password:root and change to - root::0:0:root.

In this guide, we will take a detailed look at the process of setting up a modem from Yota. The company produces several devices with different characteristics, however, their settings are the same.

What do the numbers 10.0.0.1 mean, why did iota choose this subnet

These numbers hide the web interface for the modem settings. Most users wondered why the company uses this particular subnet, since 192.168.0.1 is considered generally accepted? However, the developers did not give an answer. Perhaps they just wanted to stand out from the rest, or maybe there are some technical reasons.

How to log into the personal account of the Iota router using the 10.0.0.1 subnet

To log into your account, you need to connect to the Yota router from any device. Then do the following:

Note! In the settings of mobile routers, you can access the settings at status.yota.ru.

Entering the router setup menu

To go to the settings panel, log into your personal account, then open the “Device Settings” section.

Setting up and changing your password

To prevent your neighbors from connecting to your access point, you need to set a security code. This is done in your personal account:

Pay attention! The minimum password length is 8 characters.

You can immediately change the name of the access point to whatever is convenient for you.

Internet speed test

To understand exactly what your Internet speed is, you need to measure it. To do this you need to prepare properly:

• Reboot your router.
• Turn off Wi-Fi on all devices except the one through which the test will be carried out.
• In the operating system settings, close all applications that consume the Internet.

Now you can start the test. The most convenient way is to use a special service available on the Yota website in your personal account my.yota.ru. Follow the link and log in to your account. Among its interface, find the Internet speed measurement and run the test.

Checking the signal quality

The Yota modem signal can be checked through your personal account at 10.0.0.1. There you need to open Device Settings, and a table will be displayed on the screen. Its appearance depends on the installed version of the operating system. The signal level is determined by two parameters:

• RSRP - this indicator can be used to determine the quality of the base station signal.
• SINR - shows the interference ratio relative to the signal.

Note! If the coefficient near SINR is 0, this means the signal and interference indicators are equal to each other.

Connection status

To see the connection status, you need to go to 10.0.0.1 and log in. Then a panel will be displayed on the screen, where the connection status will be indicated along with all the information.

Can’t access address 10.0.0.1 – reasons, solution

It happens that the user cannot access the router settings because the specified address does not open. This happens for several reasons, let's look at them.

Restarting the device

Reconnect your modem or router. Then try to enter the settings interface again.

Configuring network settings

A common reason why you cannot log into the router’s personal account interface is incorrect settings. Out of habit, users set the wrong IP address. Instead of the required 10.0.0.1, they write 192.168.1.1, so nothing happens. To configure correctly:

Browser

It may be that you cannot connect due to a problem in the browser itself. Try logging in through different web browsers: Opera, Mozila and others.

Firewall

Another reason is that the Firewall is blocking access. Of course, this happens rarely, but it does happen. You need to disable the security system:

This is how you can easily enter the web interface of the Yota settings of any device. If something doesn't work, follow our instructions to fix the problem.

Greetings! Today I would like to show you how to log into Yota devices. Devices from this provider are found more and more often in homes, so this wave has reached me. They have a lot of things for accessing the Internet - these are standard whistle modems with Wi-Fi and the ability to directly connect to a computer via USB, and these are full-fledged routers. But the mechanics of connecting to the settings are the same. Let's try.

Connection addresses

Try following one of the links above and your settings account should open. Before doing this, do not forget to physically connect the devices themselves - by connecting to USB, via Wi-Fi or via wire.

Settings or personal account?

At the addresses above you will be taken to your modem/router’s personal account. There you can do everything related to your home network and managing your Yota device - for example, change the Wi-Fi password or rename the network. These are the settings of the device itself.

Many people want to top up their balance. This is not done here, but in your personal account. We will talk about it a little below, you never know what you need, because... these are two completely different things.

Personal Area

Personal account address: https://my.yota.ru

This is where you manage your tariff - selecting the speed, topping up your account, getting statistics on Internet usage. And here's what's hidden inside:

I hope everything is clear with this. I propose now to consider the settings of the modem itself.

How to log into the Yota modem?

Both addresses are suitable for connecting - which one you choose depends only on your mood. To connect to the settings, simply enter them in your browser and go to this “site”. Another option to login is to simply follow the following links:

After opening, a page with information about the status of the Yota device should immediately open:

Here is just the basics - connection status, current speeds, network parameters. To enter the settings, click on the “Device Settings” button, where the necessary settings for your Wi-Fi network will be available:

There are also advanced settings, for this you need to go to the address http://status.yota.ru/advanced.

Video on the topic

Incorrect addresses

Check that you have not mixed up the address. These addresses are not suitable:

10.10.10.0
10.10.1.1
10.10.0.1
10.0.1.1

Correct address:

Can't access status.yota.ru?

This also happens, first try 10.0.0.1 from the links above. If it suits them, great. If it doesn't work, it's more likely a network connection issue.

Possible instructions to solve this problem:

1. In the case of a USB modem, disconnect it from the computer or outlet. In the case of a router (Yota Many), turn the power off/on using the button or from the network.
2. Another problem with the modem is lack of power. Try changing the USB port, changing the power supply, eliminating any extension cords - I had this happen once, it helped to simply replace the power supply with a telephone one, otherwise the modem refused to start and did not allow access to the settings.
3. Is the modem connected to the computer? Is it possible to connect to its Wi-Fi network and connect to the settings from another device? It happens that the problem is some kind of error on the computer itself, you can try to restart it, or try another device.
4. Another common problem is network settings. But let's talk about this now.

Problem with network connections

Works forWindows 7, 8, 10 - the names may be slightly different, but the essence is the same.

So the basic steps are here:

1. Let's go to our network adapters:

Alternative option. Press the Win+R keys and enter ncpa.cpl

1. We are looking for our connection. Right-click and go to properties. And then just click on everything indicated in the figure below:

Usually, automatic configuration helps - and your computer or laptop immediately receives the correct settings with the correct subnet from the modem itself. Another option is to set up static addresses for yourself:

IP address: 10.0.0.2
Subnet mask: 255.255.255.0
Gateway: 10.0.0.1

After such manipulations, everything should probably work. But if suddenly this doesn’t help, write about your problem in detail in the comments. I will definitely help in any way I can, right up to the setup. If these instructions helped you, also write your review - it’s useful for people, and I’m pleased. Thank you very much!

We ping and check the issued gateway

Advanced users can ping their device via the command line using the following command:

ping 10.0.0.1 –t

If your device responds but doesn't work, try a different browser. Sometimes it helps. If not, there may be something in the modem itself. Another option is when the ping says that the response timeout has been exceeded, which means our modem is not accessible from the network. Even after the above manipulations, it is worth checking the current network settings and the assigned gateway. Make sure the correct settings are in place.

Before doing this, it is better to set the network settings to receive automatically (the screenshot was above). This way we can see where our computer is trying to connect.

Everything should be like this here. In my case, the settings are on another router, because... I didn’t take Yota with me on the trip, but the main thing is to compare the numbers:

IP address: 10.0.0.2
Subnet mask: 255.255.255.0
Gateway: 10.0.0.1

It happens that someone before you changed the network settings. And if all your settings are issued automatically, then the gateway here will be the modem address. But the IP address itself may vary - after all, it is unique for each device on the network, and it is distributed by the device itself (using auto settings).

Firewall and Firewall

Sometimes the address is simply blocked - by an antivirus, firewall or Windows firewall. Try turning everything off. I can't anticipate all your current settings, so try this yourself. I am only attaching a screenshot of the firewall:

Factory reset

It happens that someone before you on the modem has already changed the subnet to another one - instead of our 10.0.0/24 (changed the range of issued addresses). I wrote about this a couple of sections above. But if you’re too lazy to tinker, then custom routers with a possible problem like this have a Reset button - look, suddenly there is one (sometimes in a recess, sometimes under the SIM card). We press it, wait a while and try to connect again. The settings will return to factory settings. Yota also has such devices.

That's all. Now you will definitely connect to your “eta” under any conditions. With this I say goodbye to you. Use, rejoice and do not be afraid of all these complex technologies. In fact, they are not that difficult) But comments are always open to you)

Let's look at the new generation of modems for accessing LTE networks using the example of a Yota brand device. This interesting little device easily combines the functions of a modem and a router. Iota is capable of providing network access for eight users simultaneously. Being a modified clone of Swift WLTUBA, it inherited many of its advantages and disadvantages from the latter.

Yota connects to your computer like a regular USB modem. But this is where its similarity with this equipment ends. During our presentation, we will discuss setting up the device through status.yota.ru. In the meantime, here are some of its technical characteristics, which are useful for the consumer to know:

That's probably all. The main disadvantage of the device is its very short range. Already outside a circle with a radius of 10-15 meters, it is practically inaudible. In a room with a complex geometric shape, poor communication at a distance is also observed. However, all this is not at all surprising: the power of the Wi-Fi transmitter in the modem leaves much to be desired.

Modem configuration

Compared to previous models of the same series, the number of possible settings has increased significantly. The device is configured via the web interface. To access this interface, you need to type one of two equivalent addresses in the browser line: http://10.0.0.1 or http://status.yota.ru. The first time you land on this page, you will be asked to set a network name and password for access.

The password should be entered in such a way that traffic thieves will not figure it out in one second.

After this is done, you need to click on the “Save” button and, in principle, no further settings are needed - the device can be used. But there are several useful settings that are good to know about if you want to make working with the device more comfortable. Through the status on the page http://status.yota.ru you can adjust the following parameters:

Enable or disable Wi-Fi access. Let's say you are doing urgent work and don't want to share traffic - check this option.

Determine the type of network protection: open network or password-protected.

Set rules for port forwarding. Ten such rules can be set. This can be done on the page http://status.yota.ru/advanced.

Manually update the modem software. By default, the software is updated automatically from the manufacturer's server. But if you visit the page http://status.yota.ru/update, you can do it yourself. For fans of the anatomical theater, here is a photograph of the insides of the apparatus; all the details of the design are visible on it: