Improving the signal reception of a Wi-Fi router with your own hands. The simplest methods of boosting the signal of your router Antenna to boost the signal of a wifi router

Wi-Fi network performance is problematic in two ways. First: weak and unstable signal. Second: low data transfer speed. Both can be easily solved even by a person with a humanitarian mindset, if he reads our article or offers a box of beer to a neighbor who is an IT specialist.

The option with beer is, of course, better and revitalizes the Russian economy, and also provides a significant increase in GDP. But this option often has an incorrigible drawback: the neighbor IT specialist may not exist. And then, willy-nilly, you will have to read what we wrote for you here.

1

The most important. Make sure that at the center of your Wi-Fi network is a modern, full-fledged wireless router (aka router). The key word is modern. The fact is that communication equipment is developing as actively as the entire IT industry. Those standards, protocols and wireless transmission speeds that were the norm 5-7 years ago are now hopelessly behind. For example, not so long ago a channel of 50-60 Mbit/s was considered a decent option for the home, for the family, for show-offs. And now inexpensive devices for a couple of thousand rubles claim a theoretical 300 Mbit/s.

2

In his personal diaries, Captain Obvious has repeatedly noted that the main obstacle to a Wi-Fi signal is walls and partitions. In addition to walls, any shielding barrier containing metal can become a serious obstacle to the Wi-Fi signal - most often a mirror, an aquarium or a steel statue of Darth Vader. Demolition of all the walls in the apartment is the optimal solution to all your problems, but it is troublesome, yes. It’s easier to think about finding the optimal placement point for the signal source. Your wireless router should be as close to the center of the room as possible and should not lie on the floor, but should be placed at least a meter from the floor.

3

When you started searching for a network, you probably noticed more than once that there were a couple or even a dozen other people’s Wi-Fi signals walking around your apartment. For some reason, few people think about the fact that other people’s networks operate in the same frequency range as yours, and there is nothing good about that. According to standards, 13 frequency channels are allocated for Wi-Fi networks in Russia. We stole a screenshot of the configuration menu from the instructions for the popular ZyXEL Keenetic Lite router - you can see how in the “Network Client” mode the router shows channels occupied by neighbors. There are also separate programs that do the same thing, for example inSSIDer. All you have to do is study the resulting list, select the freest of 13 channels and set it as the default in the router.

4

Many craftsmen manually pump up router antennas by hanging tins, foil, and so on on them. In fact, the game is clearly not worth the candle - it is better to buy a suitable high-power antenna. There is a considerable assortment of them on Wi-Fi equipment websites, and some look very exotic. Antenna gain is specified in isotropic decibels (dBi). A standard antenna from a home router has a power of around 2 dBi, but finding and buying an antenna with a gain of 10-20 dBi is not a problem, and this radically solves the situation with signal availability! But it also makes sense to tame foil - recently a particularly virtuosic life hack with reflectors from , arousing increased interest, has been invented.

5

Many modern router models are equipped with a pair of antennas, and top models may have even more. Usually this provides a good signal, but if not, then changing two antennas at once will be expensive. In such a situation, it is better to install an additional signal distribution point in the apartment - such devices are called “repeaters” (Wi-Fi repeaters). They cost about the same as an inexpensive router and are easy to set up.

6

Often the problematic element in a home network is not the router, not the apartment layout, but the receiving device itself. You need to get two things off your chest once and for all. First: if you have a powerful computer for games and multimedia, it is still better to connect it to the network via a wired connection (there are a million reasons for this, and all of them are important). Second: if you are going to receive Wi-Fi via an adapter, choose not a tiny device the size of a fingernail (it is only suitable for gatherings in a coffee shop), but a receiver with a large antenna. Buying a Wi-Fi adapter with a heavy antenna also helps when your laptop receives a lousy signal, but in some corner of the room it is much better. You can plug a Wi-Fi adapter into your laptop and place its antenna in that lucky corner.

If something can be done, it can be done easily! Telegram channel MAXIM: Lifehacks

Have you bought a WiFi router, but the Internet speed leaves much to be desired? This situation is quite prosaic and occurs more often than you think. The question is “how to strengthen the signal of a Wi-Fi router?” asked by thousands of users and you, of course, are not alone. Why many people encounter this problem and what ways to solve it, we will try to reveal in this article.

Why is my WiFi signal weak?

Oddly enough, even owners of the latest lines of equipment are familiar with situations when the Internet is unexpectedly interrupted at the most interesting place. And the situation with devices that have expired is not worth mentioning at all. The thing is that the problem of signal amplification is solved in a complex manner. So, even if you have a router of the latest series, but the house has a lot of partitions and load-bearing walls, in addition to furniture, mirrors and a full arsenal of household appliances, you definitely shouldn’t count on powerful WiFi.

There are a lot of ways to strengthen Wi-Fi, but you should know that to effectively solve the problem you need to approach the issue comprehensively and try several options. Only in this case can you forget about a weak WiFi signal for a long time.

All technologies for improving communication are conditionally combined into two groups: software and hardware. In the first case, changes are made to the applications and settings of the router. This procedure is not limited to just setting a password or updating the SSID, but requires more professional intervention. In the second, the reception and transmission power increases with the purchase of a new, more productive router. But let's talk about each one separately.

Method number 1. Changing the installation location of the Wi-Fi router

When purchasing equipment, the first thing consultants pay attention to is the layout features and area of ​​the room. If the house has plasterboard or reinforced concrete partitions, then the location where the router will be installed should be chosen more carefully. The router is installed in the central part of the house so as to distribute the signal evenly throughout the network. An obstacle to the full operation of the router can also be the close proximity of DECT phones, microwave ovens, etc. If it is not possible to buy a dual-band router, then the best way to strengthen the signal is to place these devices as far from each other as possible.

Method number 2. Experimenting with frequency channels of wireless networks

Once you look at the “Remote Access” tab on your computer (bottom right), you will see a list of private networks deployed on the same frequency as your router. “Why do I need to know about the existence of other networks?” - you ask. The thing is that each of them takes up part of the channel, reducing the range of your router. To avoid such unwanted interference, you need to switch to another channel. This problem is solved using a special program, for example, inSSIDer. It is installed on the PC and launched. The program will provide you with data about the available wireless networks in your county, and what channel each one occupies. Having selected a free one, configure the device: go to the “Wireless Network” tab and select the “Channel” line. After selecting a free port, confirm the actions by successively clicking on “Change/Save”.

Method No. 3. Selecting the wireless standard 802.11n

The latest wireless standards include 802.11ac. Despite this, the 802.11n channel has significant advantages over the latter. This technology allows for the use of several antennas at once, allowing signal reception to be enhanced several times. With the transition to the "n" standard, the router can operate at the less noisy 5 GHz frequency, providing maximum coverage area. There is only one “but” here. You can safely switch to the slightly outdated 802.11n standard only if your computer and mobile equipment supports operation at this frequency. This feature is not provided in the latest line of devices.

Method number 4. We buy a signal amplifier

In the catalog of our online store website, which are distinguished by their miniature dimensions, low price and easy setup. An example of such a device is Alfa APA05, which allows you to expand the wireless signal area in any environment.

Method No. 5. We use DD-WRT firmware

It has been verified that the DD-WRT firmware significantly enhances the router’s signal, improving the stability of its operation. The program also provides access to advanced modes. But try not to overdo it: long-term operation of equipment at high power can have a negative effect on the body.

Method number 6. We set restrictions on network access

The overall network performance and reception speed are affected by the active use of the system by other family members. So, if someone in the house constantly downloads movies or plays resource-intensive games, then the rest of the users can only be content with the slow Internet. It is for such cases that the QoS (Quality of Service) setting is provided. It will allow you to set priorities for speed areas that are more important for you.

Method No. 7. Choosing a strong password for your Wi-Fi router

The router ships with a default password. However, if your neighbor is an advanced PC user, then such a password cannot become a serious obstacle to connecting to your Wi-Fi network. You can deprive him of the pleasure of using the free Internet by installing a complex code. The latter must consist of at least eight characters (a combination of numbers, uppercase and lowercase letters). For reliability, filtering is installed by MAC address and a WPA password is used. About, .

Method No. 8. Installing a more powerful repeater

This method is one of the most effective. Special signal amplifiers or Wi-Fi repeaters connect to an already deployed network as a client, expanding the network coverage area, meaning you no longer need to replace all antennas with more powerful ones. The repeater becomes the signal distribution point, providing coverage over the entire area.

If this method of signal amplification interests you, then you should know that there are two types of repeaters on sale: simple devices that perform exclusively the function of a repeater, and improved routers that can expand the coverage area of ​​a Wi-Fi network by combining several access points into a single system. Routers of the second type work with the support of WDS technology and are versatile: they are used as a repeater and as a router for connecting to the Internet. .

Method number 9. Choosing a Wi-Fi adapter with a portable antenna

This option is especially relevant for those who are pretty tired of running around the whole house, looking for corners where signal reception is stronger. The adapter is connected to the computer, and the antenna is installed in a powerful reception area. If you decide, contact our consultants.

Method No. 10. We replace the antenna with a more productive model

As a rule, the average gain of a router antenna is within 2-3 dBi. To achieve a noticeable improvement in reception, it is enough to upgrade it to a more powerful device - up to 8 dBi.

Method No. 11. We are buying a new router.

In a home/office where powerful computer equipment is installed, you will have to take care of installing a powerful router if a wired connection is not acceptable. The catalog of our online store includes Ubiquiti, Tenda, Asus, MikroTik, HP and others.

The coverage area and power of Wi-Fi signal reception and transmission can be significantly increased only after identifying the cause of poor reception. And only after that you need to use our recommendations, not in a single way, but by immediately combining several signal amplification options.

We hope that now you know how to strengthen your router's WiFi signal. If you still have questions, please contact our consultants.

Each router has its own maximum range, initially set by the manufacturer. But usually the router does not work at full capacity for some reason. Its capabilities can be increased not only by reconfiguration, but also by additional equipment.

What determines the strength and range of the signal?

All modern router models have the same operating principle. There are two main characteristics of the signal:

• force - the maximum speed of receiving and sending bits per second;
• range - the distance from the router at which you can catch a stable Wi-Fi signal.

For all routers, the signal strength and range are affected by the following factors:

• speed of the supplied Internet connection. It affects the maximum possible speed of the Wi-Fi network. The router cannot transmit data to the Internet faster than an Internet cable or Internet modem. At the same time, the maximum Wi-Fi speed is sometimes lower than the maximum Internet connection speed;
• maximum throughput. The router is a router, that is, it redirects incoming and outgoing data to the desired stream, but the speed of sorting information is limited. In most cases, it is higher than the maximum Internet connection speed, but in cheap or older models it may not be sufficient;
• router settings. There are several characteristics, discussed in a separate paragraph, that affect signal quality;
• antenna. It plays the most important role in signal propagation. It determines how far and in what direction the signal will be heard;
• receiver. Each device has a built-in Wi-Fi receiver and a small antenna. If you don't have enough signal strength, it may be the device and not the router. It may have a receiver installed that is too weak or an antenna that is not powerful enough to receive an average Wi-Fi signal.

The speed of the connected Internet connection and the maximum throughput of the router cannot be changed in any way without replacing the equipment. But other parameters can be adjusted manually, thereby achieving maximum effect.

Video: how to strengthen the Wi-Fi signal

How to improve your signal without buying equipment

There are several ways you can change signal characteristics for the better without having to buy new equipment. Let's consider them in order of increasing complexity and time-consuming implementation.

Moving the router

If you have the opportunity, move your router to the place where you spend the most time on the Internet. Since most routers have a circular antenna installed, they distribute the signal over a certain radius around themselves. And the further the distance from the center, that is, from the router, the weaker the signal. It does not stop abruptly, but decreases gradually until it becomes too weak for stable transmission of information.

The signal is heard in all directions

Changing the location of the router can also help if the Internet connection is via a modem. Perhaps in a new location the modem will catch the signal better, which means the connection speed and Wi-Fi network will increase.

Setting up the router

The network distributed by the router has two characteristics that can be changed in any router model:

• a channel is a specific frequency at which the network operates. If you live in an apartment building or are in an office with several routers, they may coincide, several routers will work in the same channel. As a result, the signal speed will drop due to the fact that the router will have to filter signals intended for other routers;
• frequency - modern routers can operate in two types of frequencies (2.4 GHz and 5 GHz). Most often, the first version is used by default, but some models allow you to switch to the second. Since most routers operate in the 2.4 GHz band, after switching to another mode the amount of interference will decrease. It should be taken into account that 5 GHz is suitable for distributing a signal over long distances, but in a small room, especially in the presence of obstacles, it can lose quality. Only by experience, by checking the speed and range of the signal at both frequencies, can you find out which option is better in your case.

Some models allow you to manually adjust the signal strength. Sometimes this parameter is set as a percentage, and sometimes in three values: low, medium, high.

Search for used channels

In Russia, you are allowed to use 13 channels (from 1 to 13 for 2.4 GHz), in America - 11. Therefore, the channel number available to you will be limited by your country of residence. Be sure to check this information before changing the channel. After setting a prohibited value, the device will not be able to connect to the network.

Before changing the channel, you need to understand whether it is worth doing and which channel you can switch to. To do this, follow these steps:

Change channel

Having found out which channel is least loaded, you can proceed to setting up the router. It will be carried out through the control panel, accessible from any device connected to a Wi-Fi network or via a LAN cable to the router:

Frequency change

If your router supports frequency change, then in the control panel this function can be found in the wireless network settings. To activate a 5 GHz Wi-Fi network, you need to switch to one of the following channels: 36, 40, 44, 48 (data for Russia, may differ in other countries).

Choosing what frequency the router should operate at

After switching to a new frequency, check whether the Internet has become more stable and faster, and whether the range of access to the network has increased.

Power change

Some models allow you to change the signal strength in the router control panel. If this item is in the settings of your model, then set the maximum available value.

We indicate the maximum power

After changing the settings, save the entered information and reboot the router.

Disable Power Saving

This item concerns setting up a device connected to the network. If the battery saving mode is activated on a laptop, phone or tablet, this may affect the stability of signal reception.

Since working with a Wi-Fi network requires a lot of energy, when energy saving is activated, the device tries to stop exchanging information over the network at any convenient opportunity. Because of this, Internet speed may drop.

Windows

To deactivate the power saving mode in Windows 10, click on the battery icon located in the lower right corner of the quick access panel. In the expanded block, move the slider towards maximum performance. It is not necessary to set the maximum value, the main thing is that the maximum operating mode is not activated.

Moving the slider towards performance

Android

Swipe down from top to bottom of your device screen. Find the battery icon. If the mode is activated, the icon will turn red or turn into a battery with a plus (depending on the firmware version). Click on the icon to deactivate the mode.

Click on the battery icon to deactivate the power saving mode

iOS

To deactivate the mode on the iOS operating system, you need to perform the following steps:

How to improve your signal with new equipment

To solve the problem, you can resort to replacing some components or purchasing additional devices.

Replacing the receiving device

Study the characteristics of the device from which you connect to the Wi-Fi network. Information can be found on the developer's official website or in the documentation that comes with the device.

The manufacturer may have installed a bad Wi-Fi receiving adapter or a weak antenna. By reading reviews, you can find out if anyone has encountered a similar problem. If the model has a problem with the adapter or antenna, it will be possible to replace these components by installing higher quality components.

You can replace the device antenna

But you should only replace components if you have sufficient experience in this. Replacing the internals will void the device warranty. If you are not confident in your abilities, contact the service center.

Antenna replacement

The antenna's job is to distribute and receive a response signal. The distribution range depends on the power of the antenna, and the sector into which the signal will be received depends on the direction. There are two types:

You can buy a more powerful circular antenna if you want the signal to be heard in all directions. This is convenient if the router, for example, is located on the second floor, but devices from the first floor, and from the third, and from rooms located on opposite sides of the router are connected to it.

If you have the opportunity to position the router so that all devices are located in one line relative to it, then you can purchase a directional antenna. This way you will achieve a high signal propagation range.

Antenna modification

If you don’t want to buy a new antenna, you can remake an existing one or make a new one yourself. There are instructions on the Internet for different models and descriptions of how to make an antenna from scratch. There is no universal method, since it is necessary to take into account the characteristics of each router, the conditions in which it will be located, the tasks it faces, as well as other characteristics of the antenna: length, width, material of manufacture, shape.

For example, you can make a special nozzle from pumpan foam or a wooden plank and nails. This attachment turns a circular antenna into a directional one, so the signal in a certain direction is amplified and weakened in others (see paragraph “Replacing the antenna”).

The antenna can be modified

The distance between the nails will increase in proportion to the distance from the antenna: 19, 24, 29, 33 mm. These distances are suitable for a router operating at 2.4 GHz.

The nozzle should be made, observing the dimensions

Purchasing repeaters

A repeater (or repeater, or access point) is a device that forwards a Wi-Fi signal sent by someone. The repeater catches the signal from the router and distributes it around itself with increased strength, that is, it relays it further.

It is convenient to use a repeater if the distributed network does not reach some point in your home or office. By installing a repeater at the extreme edge of the Wi-Fi signal, you will extend the range of the main Wi-Fi network. Setting it up is simple: one button is pressed simultaneously on the router and on the repeater, after which the devices are connected, and from that moment they begin to work in pairs.

Some routers have a “Boost” feature that turns the router into a repeater. If you have two routers, you can make one a Wi-Fi point, that is, leave it as a router, and turn the second into a repeater.

When buying an access point, you need to consider the compatibility of the router with this repeater model. It is recommended to purchase a repeater and router from the same manufacturer. For example, if you have a TP-Link router, then it is better to buy a TP-Link repeater.

Video: how to strengthen the signal through a repeater

There are many ways to improve your wireless network signal. If you don’t buy equipment, you can achieve results by changing the router settings, moving the device, or turning off the battery saving mode. With a small investment, you can replace the components of the receiving device, the router antenna, or purchase a repeater.

We've all encountered the problem of a weak signal from a router. Some people immediately think of changing the router, because it seems that the problem lies there. However, this is not quite true. If configured correctly, you can ensure good connection quality and Wi-Fi signal coverage. But if you still decide to buy a repeater to strengthen the signal, we will help you make the right choice.

What is a Wi-Fi repeater and how does it work?

In this section we will talk about what is called Wi-Fi signal amplifiers (they are also called repeaters, repeaters, repeaters) and what they are needed for.

It often happens that after purchasing and installing a router at home (in the office), you discover that the signal does not reach the desired location. Of course, you can install the router closer, then the signal will reach the computer, but if this is not possible, you have to buy this device.

The principle of operation of this device is clearly shown in the picture below. It extends the received signal from Wi-Fi and directs it to the location you need. The Internet speed remains the same.

As a rule, this device is quite compact and operates from an ordinary outlet. You can buy it from any online store and install it in your apartment the same day.

Some features of using the amplifier:

• The repeater creates a network similar to the existing one. All your devices (computer, phone, tablet) will automatically connect to the network with the best signal. For example: The router is in the kitchen, and the repeater is in the living room. If you go into the kitchen with your phone, the signal will be received from the router, in the living room - from the amplifier.
• You can easily set up a local network. All devices will be connected to the same network, regardless of the signal source.

How to strengthen the Wi-fi signal with your own hands?

Overall, this device is very useful for the home, however, depending on the model, you will have to pay a pretty penny for the amplifier. Don't want to spend money? Then use our tips to strengthen the Wi-Fi signal in your home or office:

1. Place the router in the center of the apartment/office.

Many people install a router in the hallway, or in the farthest room. This is certainly a convenient location, and there is no need to run the cable throughout the apartment, but the Internet will suffer greatly because of this. Therefore, we recommend installing the router initially in a room that is equally distant from all others (as shown in the picture below). If you only need Internet in one room, then install the router in it. In this case, you do not need to buy a repeater.

The picture shows an example of good and bad location of the router in the apartment. If you do not want to provide your neighbors with your Internet, then it is better to place the Internet source in the middle of the apartment.

Special analysis programs will also help you place the router correctly. With the WiFi Analyzer program you can measure the points where the Internet reception is worst and best. Based on the data obtained, it is easier to choose the right place.

2. Change the channel your router is running on.

Unless you are the proud owner of a modern dual-band router, then your router operates at 2.4 GHz. The trouble is that there are only 13 channels in this frequency. Among them, you need to select the least loaded one and connect to it. A simple program called inSSIDer will help with this.

You can download this program completely free of charge. With its help you will see a minimally loaded network. We do not recommend choosing the outermost channels (1st, 2nd, 12th and 13th). As a rule, they are the weakest, so no one wants to connect to them.

Nowadays, every apartment is equipped with high-speed Internet. Therefore, there may simply not be any free channels. If you are unlucky, then move on to the next point.

3. Set the maximum signal power.

On some models you can set the strength of the transmitted Wi-Fi signal. You can view this setting in “Advanced settings”. As a rule, this parameter is set to 100% by default. But the settings might have gone wrong, so it wouldn’t hurt to check them.

4. Update your router's firmware.

Go to the manufacturer's website and look for the latest firmware for your device. If you have a problem from the very beginning, then most likely this is the reason. Manufacturers never fix problems during the development/testing of new devices, so they update them with new firmware.

5. If all else fails.

TOP 7 best amplifiers for home and office

Here we come smoothly to the most important part of our article. Below we will review the best repeaters of 2017 according to users. To do this, we have selected the TOP 5 best devices from different manufacturers.

Asus RP-N12

A very good signal booster for home and office. Its functionality includes the functions of a repeater, access point and network bridge. You can connect it to any outlet in your home, and it can be configured with one click on the WPS button. Two powerful antennas will provide an uninterrupted Wi-Fi signal to any point in the house.

The indicator on the front panel will help you determine the most optimal point for placing this device. If the signal from the router is good, the green indicator will light up; if it is bad, the red indicator will light up.

Advantages of the amplifier according to user reviews :

• Very easy to connect and establish a connection.
• Two powerful antennas that provide a good range.
• Maximum connection speed: 300 Mbit/s.

Flaws :

• Sometimes it loses connection with the router, so you have to reboot.

Xiaomi Mi WiFi Amplifier

The most compact repeater that you can easily take with you on trips/travels. You can install and configure it in a few minutes. Just connect it via USB and the device will sync itself within a few minutes.

This device is capable of doubling the router’s coverage area. The connection speed for such dimensions is 150 Mbit/s, which will be sufficient for most routers.

Pros of the repeater according to user reviews :

• A compact device that can be carried in your pocket.
• Almost doubles the router's coverage area.
• Automatic synchronization.

Minuses :

• Automatic synchronization occurs only with Xiaomi routers. For everyone else, you need to use the special Xiaomi Smart Home application.

TP-Link TL-WA850RE

A convenient repeater for your router that will quickly and easily increase your Wi-Fi signal coverage area. Connecting and setting up the device is very simple. Plug in and press the Range Extender button on the amplifier, and the WPS button on the router.

TP-Link TL-WA850RE will provide the most complete coverage in your apartment and eliminate “dead zones”. The signal transmission speed can reach 300 Mbps, which will be enough for games, videos and movies.

pros :

• Easy to set up, can be connected anywhere.
• Good signal; removes “dead zones” where there was no Internet.
• Saves the profile so there is no need to reconfigure when reconnecting.

Minuses :

• Not detected.

TP-Link AC750

This repeater will be an excellent option for those who need to increase the signal coverage radius in two bands. TP-Link AC750 operates in the 2.4 GHz or 5 GHz bands, thereby providing data transfer rates of up to 750 Mbps.

Connecting the amplifier is not difficult. Plug it into a power outlet, press the Range Extender button and the WPS button on the router. In a couple of minutes the connection will become active. When connected, it completely copies the router address.

Advantages :

• Provides complete signal coverage over long distances.
• Quick setup and connection.
• Beautiful design.
• Operates stably on two frequency ranges: 2.4 and 5 GHz.

Flaws :

• High price.

TP-Link Re350

This amplifier is one of the leaders in our rating. It can operate on two frequency bands: 2.4 GHz (speed up to 300 Mbit/s) and 5 GHz (speed up to 867 Mbit/s). Installing the amplifier takes a few minutes. Plug it into a power outlet, sync it with your router and select the appropriate frequency.

The indicator on the front panel shows the signal strength from the router. If the blue light is on, then the signal level is good enough and there is no need to reinstall the repeater. If the light is red, then connect the amplifier closer to the router. Two antennas provide good Wi-Fi coverage. You can configure the TP-Link Re350 to work with almost any router.

Benefits according to user reviews :

• Operates on frequency ranges: 2.4 and 5 GHz.
• Thanks to two powerful antennas, it transmits the signal far.
• It's easy to find the optimal repeater location thanks to the LED indicator.
• Beautiful design.

Flaws :

• High price.

Netgear Orbi AC3000

If you lack the power and coverage of previous models, then you should take a closer look at this model. When you buy the Netgear Orbi AC3000, you get two portable devices (a router and an amplifier) ​​that connect together and provide speeds of up to 1500 Mbps. The coverage area of ​​this amplifier is much larger than in standard models. It is ideal for use in country houses or large offices.

Externally, the Netgear Orbi AC3000 looks quite attractive, so it can be connected in a visible place. If the amplifier does not reach the place you need, you can buy another device that will connect to the router.

pros :

• By purchasing the kit, you receive a router and an amplifier.
• Very large range.
• High data transfer speed.
• Beautiful design.

Minuses :

• High price.
• You cannot create a chain of repeaters.

Asus RP-AC68U

The main task of this device is to increase the coverage of the Wi-Fi network. It copes with this task 100%, because it provides an uninterrupted connection on two bands: up to 1300 Mbit/s in the 5 GHz range and up to 600 Mbit/s in the 2.4 GHz range. Four internal antennas provide large coverage area.

The device can operate in several modes: amplifier, bridge, wireless access point. Setting up the work is very simple. Sequentially press the WPS buttons on the router and repeater Asus RP-AC68U, and you can get to work.

pros :

• High bandwidth wireless network.
• Can serve as an amplifier, bridge and access point.
• Does not reduce the speed of the wireless network.
• Unusual design.

Minuses .